Installation Guide
Table Of Contents
Page | 3 Rev A 10/19
5. Use the supplied terminals to complete the wiring:
a) Use the small diameter supplied spade terminals for the two wires coming from the
LEDs
b) Use the larger diameter supplied spade terminals for the connections to the vehicle
chassis.
c) Connect the black wire from the Parking LED to the vehicle wiring harness ground wire.
d) Connect the red wire from the Parking LED to the parking light wire in the vehicle wiring
harness.
6. Refer to the Rennline LED Headlight Upgrade kit Installation Guide to complete the
headlight installation.