User guide
Users Manual
26
SUPERVISE
SUPERVISION
RHAON constantly checks (supervises) each loudspeaker in the system and provides system operators with a comprehensive set of moni-
toring and loudspeaker/amplier management tools. It alerts the operator to a problem anywhere in the system and assists in identifying
the problem take corrective action.
The Status eld at the bottom of each loudspeaker’s icon allows the operator to monitor all Loudspeakers or Groups at a glance. The
icon’s status bar continuously displays a text message that indicates the status of the loudspeaker. If RHAON detects a problem, the status
changes color and the text message denes the nature of the problem
If there is a problem with a loudspeaker in a Group, the Group icon will change color and display a text alert. If a Group icon displays an
alert (yellow or red bar with text), double-click it to Expand it and show all of its Loudspeaker icons. One of more of these icons will display
the same alert: double-clicking on it will open the loudspeaker’s Properties window in Supervise mode and provide additional information
on the nature of the problem.
A summary of the color/warning messages follows.
COLOR MESSAGE STATUS
GREEN OK This loudspeaker is (or all loudspeakers in this Group are) connected
and operating
YELLOW Overload Amplier is being over driven
RED Unassigned Virtual loudspeaker has not been assigned to a physical loudspeaker
RED Ofine Loudspeaker has lost power or been disconnected from the network
RED Driver Open One of the loudspeaker’s drivers has failed
RED Hot An amplier’s over temperature circuitry is engaged
RED Limiting An amplier is being over driven or malfunctioning
RED Amp Fail An amplier has failed
If a Group icon displays an alert (yellow or red bar with text), double-click it to Expand it and show all of its Loudspeaker icons. One of
more of these icons will display the same alert: double-click it to open the loudspeaker’s Properties window in Supervise mode.