Owner's manual

IC Live Users Manual - Models ICL-R & IC215S-R

The opening Beam Steering window shown on the previous page doesn’t show the array’s beam. Pressing the Calculate Mapping button

and following the prompts tells the program to calculate and display the beam. A typical Map appears below.

Note the four control buttons in the lower right corner of the Beam Steering

window. Pressing Write to Device will send any beam steering conguration

setting changes you have made directly to the array’s DSP and write over any

previous settings.

Pressing Save to Preset will store the conguration settings as a conguration

Preset in the selected preset le. We’ll go into Presets in more detail later.

Note that in both cases, only the beam steering information is being sent to the

Array’s.

Export Setup will generate a .rhs setup le that can easily be imported into an

EASE and EASE JR model for a detailed acoustic evaluation. Beam Steering

shows you the array’s vertical coverage, but not the horizontal coverage or the

effect of reections on intelligibility and clarity. EASE and EASE JR do.

Import Setup allows you to import into Beam Steering any changes you may have made in the conguration settings in EASE or EASE JR.