SATA HDD/SSD Eraser TP Eraser Series TP100G EN User Guide V 2.
Content Index Content Index 3 Disclaimer of Warranties 4 Notice & Reminder 5 1 Product Introduction ① Overview ② Features ③ Package ④ Appearance 2 Function Table -Function Table ⑤ Adjust Clock 5 Log Manager ❖ Log Output ① Out Today Report ② Out Recent Report ③ Out Period Date ④ Advanced Function ⑤ Create Log HDD ❖ PC-Monitoring ❖ Log 6 6 7 7 6 Specification 9 Specification Table 3 Erase Function ❖ Data Sanitization ① Quick Erase ② 1-Pass Erase ③ 3-Pass Erase(DoD) ④ 3-Pass Erase(CSEC) ⑤ 3-Pa
Warranties Disclaimer of Warranties Any unauthorized action of copyright is strictly prohibited, and the manufacturer disclaims all warranties or representations of illegal actions by users. The manufacturer also disclaims any liability for any loss or damage due to not being able to perform its undertakings or provide any of the services attributable to any events or circumstances beyond our control. Users agree and accept all statements above as soon as purchasing our products.
Notice Notice & Reminder ✏ Important Notice ⊙⊙ Read the complete operation instruction carefully contributes to better operation. ⊙⊙ The eraser is designed for frequent data erasing, please make sure not to connect any source HDD or any important HDD into HDD port before entering any erase function. ⊙⊙ When the power light flashes, please do not remove HDD in the port. ✏ Safety Precautions ⊙⊙ The warranty will expire if damage is incurred resulting from non-compliance with theses operating instructions.
TP100 Eraser 1 Product Introduction ➀ Overview TP100 Eraser supports both SATA/IDE interfaces data wiping, designed for data erasing consumers. TP series allow all business to seek an economic way to perform the safest hard drive cleaning and recycling work. Using HDD eraser to overwrite data has been proven safe and effective method to prevent the risk of data retrieval by others. The HDD is cleaned and can safety be discarded or recycled.
TP100 Eraser ➂ Package ⊙⊙ TP100 Eraser ⊙⊙ Power adapter ⊙⊙ Power cord ⊙⊙ User manual ⊙⊙ USB A-B cable ⊙⊙ SATA HDD cable set ⊙⊙ IDE HDD cable set POWER ON/OFF HDD/SSD ERASER UP OK DOWN ESC OK Fail SATA Power POWER IDE ➃ Appearance ➢➢ Front View Power switch Power port USB A/B cable UP OK LCD ESC display DOWN Red: Fail Green: Pass Yellow: Powering SATA port HDD power port SATA IDE port IDE 7
TP100 Eraser Connect SATA HDD/SSD Connect IDE HDD/SSD ➢➢ Side View SATA port HDD SATA接口 硬碟電 源接口 power port 8 IDEIDE port 接口
Function Table 2Function Table Function 1. Quick Erase 2. 1-Pass Erase 3. 3-Pass (DoD 5220.22-M) 4. 3-Pass (CSEC ITSG-06) 5. 3-Pass (HMG Enhanced IS 5) Item & Description Erase the INDEX of HDD, and take very short period of time. (Data & system only) Erase the whole HDD, including empty space by written-in 00. (Whole HDD area) Erase and overwrite whole HDDs for 3 times by written-in 00>>FF>>Random.
Function Table Function Item & Description 10.1 Show Disk Info Show the information of connected HDDs, such as brand name, total capacity, erase time, size of hidden area and etc. 10.2 System Info Show the information of the duplicator, such as 10.Utility controller model number, software version, and etc. 10.3 Update System Update the system firmware. 10.4 Start-up Menu Select which function is shown first when the system is turned on. 10.5 Adjust Clock Reset the system time clock on LCD. 11.
How to Erase HDDs 3Erase Function ❖ Data Sanitization All erase modes will damage the data in HDD. Please make sure you have backup all important data before using this function. To cancel operation of any erasing mode, press key and hold continuously for 3 seconds to exit any erasing tasks.
How to Erase HDDs SATA IDE Connect to SATA HDD 硬碟 Connect to IDE HDD Step 3: Select one erase function 1~9 USB線 It is highly recommended to use function [1.Quick>>HDD first-time users to test Erase] forErasing<< erasing. Follow the steps after entering the function. 硬碟外接盒 Booting… Please refer to the section ① Quick Erase, LCD screen and steps. PC 硬 HDD Eraser ① Quick Erase 硬盘 Prepare disposal HDDs. Insert disposal HDD to the erasing port. (IDE or SATA interface) USB线 Enter function [1.
How to Erase Searching TargetHDDs Quick erase will only erase the Index of the HDD. It is the quickest way to erase HDD. It will damage the data in HDD. Caution The erase mode will damage the data in HDD permanently. Please make sure you have backup all important data before using this function. ② 1-Pass Erase Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [2. 1-Pass Erase] (Whole HDD Area). Press < 〇 > to start erasing.
How to Erase HDDs ③ 3-Pass Erase (DoD) Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [3. 3-Pass Erase (DoD5220.22-M)]. Press < 〇 > to start erasing. DoD Erase, 3-Pass, complies with US military standard of DoD5220.22-M E (USA Department 100GB HDD for of Defense). The mode fully erases the00000000000 00000000000 20GB 3 times bit-by-bit to overwrite HDD 00000000000 data and 00000000000 00000000000 guarantees data not recoverable.
How to Erase HDDs ④ 3-Pass Erase (CSEC) Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [4. 3-Pass Erase (CSEC ITSG-06)]. Press < 〇 > to start erasing. CSEC, 3-Pass Erase complies with the Canada standard of CSEC ITSG-06 (Communications Security Establishment Canada ). The mode fully erases the HDD for 3 times bit-by-bit to overwrite HDD data and guarantees data not recoverable. T he first time overwrites data with 0, second time with 1 and the third time with random characters.
How to Erase HDDs ⑤ 3-Pass Erase (HMG) Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [5. 3-Pass Erase (HMG Enhanced IS5)]. Press < 〇 > to start erasing. HMG, 3-Pass, complies with UK government standard of HMG Infosec Standard 5 (IS5). The mode fully erases the HDD for 3 times bitby-bit to overwrite HDD data and guarantees data not recoverable. The first time overwrites data with 0, second time with 1 and the third time with random characters.
How to Erase HDDs ⑥ 7-Pass Erase (VSITR) Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [6. 7-Pass Erase]. Press < 〇 > to start erasing. 2015/02/16 10:10 6.7-Pass Erase(VSITR) 20 6. VSITR, 7-Pass Erase complies with the German standard of BSI VSITR ( German Federal Searching Target 等 Office for Information Security ). The mode fully erases the HDD for 7 times bit-by-bit to overwrite HDD data and guarantees data not recoverable.
How to Erase HDDs ⑦ Custom Erase Setup HDD erasing methods, looping and time. Prepare disposal HDDs. Insert disposal HDD to the port. Firstly, setup looping number and method pattern. Enter function table [7.2. Setup Pass#] or [7.3. Setup Pattern]. When run Custom Erase, enter [7.1. Run##Pass] to run self-defined erase pattern. For first-time users, enter [7.1. Run##Pass] to test erasing. The erasing pattern run the original default parameter. ❶ Setup Looping Number Enter function table [7.
How to Erase HDDs Example: Setup Pattern 1 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 22222222222 11111111111 11111111111 11111111111 11111111111 11111111111 11111111111 111111111
How to Erase HDDs ⑧ Secure Erase Prepare disposal HDDs. Insert disposal HDD to the port. Enter function [8. Secure Erase]. Press < 〇 > to start erasing. Secure Erase complies with international authorized high standard NIST 800-88, China security standard of BMB21-2007. Secure Erase will remove all data from a drive and will not be recoverable, including hidden, unreachable areas. Any HDD with security command supported could execute this mode successfully. 2015/02/16 10:10 8.Secure Erase 20 8.
How to Erase HDDs ※ Print Erased Report • View Erased Report Include items such as HDD serial number, elapsed time, erase mode, task status, and etc.
USB线 How to Erase HDDs 硬盘外接盒 电脑 • By Log HDD HDD USB cable PC HDD Enclosure ReadIDE and print log from log HDD via USB A-B cable to PC/NB SATA Connect Log HDD to the eraser machine 硬碟 USB線 -Sample of Log Report 硬碟外接盒 PC Date / Time Erase Mode 2014-05-28 16:45:27 Elapsed Time 00:00:03 (QUICK ERASE ) 硬盘 USB线 硬盘外接盒 电脑 0000118 [Port:02] 2014-05-28 16:45:27 Elapsed Time 00:00:03 (QUICK ERASE ) (PASS )Capacity:298.
Utility Function 4Utility Function ❖ Utility Tool 2015/02/16 ① Show Disk Information10.Utility Show the information of connected HDD to the port. ⊙⊙ Connect the HDD to the port for checking information. ⊙⊙ Select function table [10. Utility]>> [1. Show Disk Info]. ⊙⊙ Press < 〇 > key to enter the function. ⊙⊙ Press ▼ down key for HDD fur ther information, such as HDD brand name, HDD serial number, HDD model, HDD capacity, and etc. 2015/02/16 [Utility] 10.Utility 1.
Utility Function ② Show System Information Display all information of the machine. ⊙⊙ Enter the function [10. Utility]>> [2. System Info] ⊙⊙ Press < 〇 > to enter and use ▲ ▼ up/ down key to check all eraser information, such as model, firmware version, build number, etc. [Utility] 2.System Info [附 2. HDD Eraser Ver:2.34.4 HD 版 HD3551_0001 HD Build:2015010701 [10000,0] B [1 FPGA:67160000 F ③ Update System Firmware This function is to update system firmware on the eraser.
Utility Function Step 3: Enter Update System Select function table [10. Utility]>> [3. Update System], and press < 〇 > key. The system will automatically start to update new firmware. Update will be completed in one minute. Turn off the machine and wait for 5 sec to restart. The system will automatically complete firmware update. Caution Please do not disrupt during BIOS update, otherwise it would cause irretrievable error on the machine.
Log Manager 5 Log Manager ❖ Log Output Log Report is to assist users in monitoring, recording and managing all tasks. After finishing all the task, users could output a log report of text files to desktop or notebook. Enter function [11. Log Manager], and then choose among "7.1" to "7.3" range options, to export log report of today, recent 28 days or selected period of date. ① Out Today Report Export log report of today via USB port or log HDD. Enter function [11.1 Out Today Report].
Log Manager ② Out Recent Report Output the log records in recent 1 to 28 days via USB port or log HDD. Enter function [11.2. Out Recent Report]. Press < 〇 > to output data of recent 28 days. Read log on PC/NB. [Log #1-#18] 2.Out Recent Report [記 2. [Out Recent Report] Recent 3 days 輸 Out Report File File: 1(6) 輸 檔 Save Log File…. ③ Out Period Date Output the log records of a period time via USB port or log HDD. Enter function [11.3. Out Period Date]. Press < 〇 > to output data of the date range.
Log Manager ❶ Clear ALL Log After entering password and pressing < 〇 >, all log report saved in the machine will be wiped out. ❷ Setup Password Users can reset new password to protect logs data. When reset, using ▲▼ keys to input password. 4.Advanced Function [#Log #1-#18] 4.Advanced Function Enter Password 1. [記 1. 請 == > _ Enter Password == >_ [Advanced Function] == 請 == [進 1.Claer ALL Log [Advanced Function] 1.Claer ALL Log Warning: Clear ALL Log? Warning: Clear ALL Log? 1. [進 1.
PC-Monitoring / Log ❖ PC-Monitoring ※ PC Monitoring Status Real-time PC-Monitoring is a convenient tool to monitor real-time status for advanced series, that real-time tasks skip lower speed HDDs in writing process to keep its best performance. ◎ Software Overview The related drivers and software icons for the series are descripted as followings: LV07H: PC-Monitoring driver for HDD series duplicators. Click on the icon to open the software directly.
PC-Monitoring / Log Step 3: Please wait during installation processing. Step 4: Click to complete installation.
PC-Monitoring / Log ◎ Start to Launch PC-Monitoring Step 1: Please confirm that monitoring software "LVO7H" and the driver "PL-2303" have been installed well. Step 2: Prepare USB cable to connect between computer and the duplicator. Step 3: Launch LV07H by double clicking on software icon "LV07H ".
PC-Monitoring / Log Step 5: When the following screen shown, the eraser is linked to the computer successfully, ready to use real-time monitoring function. Step 6: If the status is not shown normal online status, please check step 1~3 again.
PC-Monitoring / Log ❖ Log Log Report is a very important management tool to assist users in monitoring, recording and managing the whole erasing process and the result. ※ How to Use Log Report ◎ Log Output Besides PC-Monitoring, LV07H can browse Log Report from the eraser through PC. Specific models of the machine can provide exporting log through USB port. By saving to USB drive, log records can be saved in a specific location and file name.
PC-Monitoring / Log ➋ Log Data After linked to the computer, firstly it will show all log records of this machine, the most recent data logs will show on the bottom of the screen. Click in the field of LV07H screen . It can specific certain period range records. ➌ Select Date Range After entering , select the date range for log report to check records of the duplicator. Select starting date and ending date.
PC-Monitoring / Log ➍ Generate Report After selecting the date range, clicking the tab for log report generation, log report will display immediately as the following example. The HDD eraser is able to record up to 30,000 records of operation information of HDD. One operation on a single HDD is saved as one record.
PC-Monitoring / Log ➏ Save the Report to the Specific Location Specify a location and a name to save log. ❼ Complete to Output Log Reports After successful creating and saving the log, the report has been output to the location. ◎ Screen of Text Logs ➊ Erase Report Erase reports printout erasing status of single port.
PC-Monitoring / Log ➋ Erase Report Event log reports printout tasks status of the machine. The report shows tasks information, the device details.
Product Spec 6Specification Name TP Evidence Eraser Model TP100-G Target/port Single port erasing Maximum speed 7.2 GB/min (120MB/sec)*(Actual performance would depend on HDD quality) Erase Function Quick Erase, Full Erase, DoD Erase(DoD5220.22-M), 3-Pass Erase(CSEC ITSG-06, HMG Enhanced IS 5), 7-Pass Erase(VSITR), Custom Erase, Secure Erase, Enhanced Secure Erase Connector SATA-HDD, IDE-HDD, HDD power port Interface 1.8"/2.5"/3.5" SATA 1.0/2.0/3.
www.ureach-inc.