User manual

22
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors These seven Serial ATA3
(SATA3_1: see p.11, No. 11)
(SATA3) connectors support
(SATA3_2: see p.11, No. 10)
SATA data cables for internal
(SATA3_3: see p.11, No. 12)
storage devices. The current
(SATA3_4: see p.11, No. 9)
SATA3 interface allows up to
(SATA3_5: see p.11, No. 15)
6.0 Gb/s data transfer rate.
(SATA3_6: see p.11, No. 13)
(SATA3_7: see p.11, No. 14)
USB 2.0 Headers Besides two default USB 2.0
(9-pin USB_11_12)
ports on the I/O panel, there
(see p.11 No. 24)
are three USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
(9-pin USB_13_14)
2.0 ports.
(see p.11 No. 23)
(9-pin USB_15_16)
(see p.11 No. 22)
USB 3.0 Header Besides six default USB 3.0
(19-pin USB3_9_10)
ports on the I/O panel, there is
(see p.11, No. 8)
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
SATA3_6 SATA3_3 SATA3_1
SATA3_7 SATA3_4 SATA3_2
SATA3_5
1
USB_PWR
P-12
P+12
USB_PWR
P-11
P+11
GND
GND
DUMMY
1
USB_PWR
P-14
P+14
USB_PWR
P-13
P+13
GND
GND
DUMMY
1
USB_PWR
P-16
P+16
USB_PWR
P-15
P+15
GND
GND
DUMMY