User manual

InstallationoftheendstopfortheY-direction

1x aluminium block, black

1x cylinder head screw M3x20

1x slot nut M3

Inserttheslotnutintothetopofthealuminiumprolewiththeright

Y-guiderailasillustrated.

Attach the aluminium block in the slot nut with the cylinder-head

screw.

The aluminium block must be aligned as follows:

Whenthelimitswitchhitsthealuminiumblockandisactuated(1),the

guidecarriagestillmustbecompletelyplacedontheguiderail(2).

However,itshouldbeonly0.5to1mmfromtheendoftherail(2).