User manual

Turntheoperatingknob(10)untilthemenuitem"Bed:0" is selected

andpushthebuttonoftheoperatingknob(10).

Turntheoperatingknob(10)totherightuntilthedesiredvalue"60"

(here:60°C)isdisplayed.Theheatingelementisheatedupatonce

after turning.

Toreturntothemenu,pushtheoperatingknob(10).

Now the same value as set before should be shown here.

Inourexample,wehavechosentheoptimaltemperatureforthela-

mentused(here:PLA).Youcanadjustthevalueaccordingtoyour

lament.

The printer will switch back to the main menu automatically after a

few seconds. The previously set target temperature and the current

temperature of the extruder below are displayed here.

Wait until the extruder and the heating element for the printing plate

are completely heated up. Let both continue to heat for at least 10

minutes until the full expansion is reached. Then continue.