User manual

c)FunctionsoftheIndividualMenuItems

Thetop-mostpointineachsubmenu(toberecognisedbytheunwoundarrowupwards)switchesbacktotherespectiveprevious

menu. Therefore, these items are not included in the explanation.

Info screen Switches back to the main display

Prepare

Auto home Move all axes into the home position

Set home offsets Specifythezeropoint-performahomingrunwiththerepeatersoftwareandthenexecute"Sethomeoffset";rst

setthedistance(worksonlyafterrestartofthesoftware)(youcanalsosetanoffset,e.g.toprintontoanobject)

Move axis Move 10 mm MoveX MovestheX-axisinstepsof10mm

MoveY MovestheY-axisinstepsof10mm

Move 1mm MoveX MovestheX-axisinstepsof1mm

MoveY MovestheY-axisinstepsof1mm

Move Z Moves the Z-axis in steps of 1 mm

Extruder Moves the infeed motor in steps of 1 mm

Move 0.1mm MoveX MovestheX-axisinstepsof0.1mm

MoveY MovestheY-axisinstepsof0.1mm

Move Z Moves the Z-axis in steps of 0.1 mm

Extruder Moves the infeed motor in steps of 0.1 mm

Disable steppers All motors are switched off.

Preheat PLA Prepares the printer for printing of PLA; setting in the menu item "Preheat PLA conf"

Preheat ABS Prepares the printer for printing of ABS; setting in the menu item "Preheat ABS conf"

Cooldown Cooling off; all heatings are switched off

Control

Temperature Nozzle: 0 Manuallysettingtheextrudertemperatureforextruder0(e.g.forlamentchange)

Fan speed: 0 Manually setting the fan speed

Autotemp: Off/On Automatic adjustment of the temperature when the printing speed is increased; printing

faster=highertemp.

Ext. Min: 210 Min-value for the temperature limit of the autotemp setting

Ext. Max: 250 Max-value for the temperature limit of the autotemp setting

Ext. Fact: 000.10 Controller values for hot end

PID-P: +022.20 Controller values for hot end

PID-I: +001.08 Controller values for hot end

PID-D: +114.00 Controller values for hot end

PID-C: 100 Controller values for hot end

Preheat PLA conf Fan speed: 0 Setting the fan speed for the function "Preheat PLA"

Nozzle: 180 Setting the extruder temperature for the function "Preheat PLA"

Store memory Saves the setting for the function "Preheat PLA"

Preheat ABS conf Fan speed: 0 Setting the fan speed for the function "Preheat ABS"

Nozzle: 240 Setting the extruder temperature for the function "Preheat ABS"

Store memory Saves the setting for the function "Preheat ABS"