User manual

AttachmentofthecablestothemainPCB

Place and fasten the cables at the main PCB.

Takelongcableties(142mm)forthethickercablestrandsandthe

shortcableties(99mm)forthethinnercablestrands.

Assemblyoftheconnectionplugforthemainsunit

1x mains unit

1xcable09approx.85mm(2lines;1xred;1xblack)

1xconnectionplugfromthemainPCB(green)

Connect the two lines of cable 09 to the connection plug of the main

PCB.

The black line goes into the terminal at the far right, the red one into

the terminal to the left of it.