Manualshelf

User manual

ManualsBrandsRENKFORCE Manuals3D PrintingRF500 Maker 3D printer assembly kit
71727374757677787980
76
Connectionofthemotorforlamentinfeed
1x cable 08 approx. 280 mm Connect cable 08 to the connection plug of the motor for the extruder
and place it through the cut-out of the main PCB.
Connect the other end to the connection "Motor ext. 0"(seeconnec-
tion plan). The pin with the brown line must be at the top as shown in
ourgureandmarkedintheconnectionplan.