User manual

PushingontheadapterPCB

1x additional PCB

1x adapter PCB

Push the adapter PCB onto the additional PCB as illustrated. All pins

in the adapter PCB must be pushed into the socket strip.

PushingthejumpersontotheadditionalPCB

1x additional PCB

12x jumper

6 pins each are placed between the continuous pin series into which

themotordriversareinsertedlater(2rowswith3pinseach).3jump-

erseachmustbeputontothesepins.Thereare3eldsontheright

sideofthePCB(motorsX,YandZ),andoneeldontheleftside

(lamentinfeed).

Puton3jumperspereldasillustrated.

The5theldattheupperleftremainsempty.