User manual

66
AttachmentofthemainPCBtothePCBholder
1x PCB holder
3xhexagonscrewM2.5x16(plastic)
3xnutM2.5(plastic)
1x main PCB
3xspacer2mm(diameterinside3mm)
3xspacer8mm(diameterinside3mm)
Attach the main PCB to the PCB holder.
The PCB holder and the main PCB must be aligned as illustrated!
Begin with the left screw at the middle of the PCB.
Install the screws one at a time. After inserting a screw, secure it with
a nut.
The order is:
Hexagonscrew-spacer2mm-PCB-spacer8mm-PCBholder
- nut
Once all screws are inserted, align the PCB straight. Carefully tighten
all nuts and do not over-tighten them!
This is the view from below for inspection.