User manual

46
Attachingthefanatthefansheet
1x fan sheet
1x fan
3x cylinder head screw M2x16 black
3x nut M2 black
Install the fan on the fan sheet from above with the 3 cylinder-head
screws and nuts. The screws must be pushed through the sheet and
thefanfrombehind(fromtheviewasillustrated).Thenutsmustbe
on top of the fan.
The fan must be aligned so that the connection cables are placed as
showninthegureandtheblowingdirection(markedbyanarrowon
the fan) goes through the fan sheet.
Optionally, the nuts can be secured with threadlocker varnish.
Assemblyofthefansheetontheextruderholder
1x fan sheet with installed fan
2x cylinder head screw M3x5 black
1x extruder holder
Attach the fan sheet to the front of the extruder holder with both cyl-
inder-head screws.
The fan must be turned away from the holder.
Optionally, the nuts can be secured with threadlocker varnish.