User manual

ThreadtheM5-cylinder-headscrewwithoutwasher(orthecylinder-

head screw M5x35 with the plastic washer) through the counter-

holder and the right bore of the spring holder into the extruder motor

holder(1).

Foldthespringholderwiththepressurespring(2)ontothewasher

placedbeforewasher(3).

Now push the M5-cylinder-head screw with the washer into the left

boreofthespringholder(4).

Push the spring holder with the pressure spring (1) including the

washerintothecorrespondingboreoftheballbearingholder(2).Now

threadthecylinder-headscrew(3)throughthe

left bore of the extruder motor holder.