User manual

Aligningthedeectionshaftandtighteningthedoublesprocket

Nowalignthedeectionshaft.Itmustbepushedintotheballbearing

to the same depth as far as possible on both sides.

Check how far the shaft protrudes from the ball bearing on both sides

bylookingintotheslot(wherethescrewdriverisplacedwiththeshaft

ontheothersideinthegure).

Takeaat-headscrewdriverorasimilartoolandmovetheshaftto

the right or left until it is aligned centred.

Now check if the double sprocket is aligned with the spacer on the left.

Then tighten the two threaded pins.