User manual

AttachmentofthesprockettotheY-motor

1x actuator

1x sprocket 5 mm

2x threaded pin M3x5

Push sprocket onto axe of the actuator and attach it with 2 threaded

pinseach.Athreadedpinmustmeettheattenedsideoftheaxis.Do

not tighten the threaded pins fully yet.

Themotoraxismustendushwiththeupperedgeofthesprocket.

Optionally, the threaded rods can be secured with threadlocker var-

nish.

InstallingtheY-motortotheY-motorholder

1xY-motorholder

1x actuator with installed sprocket

4x cylinder head screw M3x8 black

Installthemotorto theY-motorholderwiththe4M3-cylinder-head

screws.Themotorplugmustbealignedasshowninthegure.