User manual

Installingthearticulatedfeet

4x foot

4x ball-head screw Ø40 M5x20 incl. counter-nut

Screw the counter-nut to the stop in all four ball-head screws.

Take the basic frame and put it upside-down. Do not crush the toothed

belts.

Screw one ball-head screw each into the bottom of the vertical alu-

miniumproles(1).Screwthescrewsintothestop.

Pushonefootontoeachballheadwiththeballofyourthumb(2).

Finally, align the feet. Place the basic frame on a level, straight sur-

face. After setting the feet, tighten the counter-nut towards the alu-

miniumprole.

Installingthealuminiumprolesforthelamentholder

1xaluminiumprole86mmwithbore

1x cylinder head screw M5x20

Thealuminiumproleforthelamentholderisattachedfromthefront

viewtothelowercross-proleoftheleftsidepart.

Attach the aluminium prole as illustrated with the cylinder-head

screw(1).

Theprolemustbealignedsothatthemilledsideoftheboreispoint-

inginwards(2).