User manual

14
9.RequiredToolsandMaterial
Thesecondpart("Maker-constructionkit")ofthischapter("9.RequiredToolsandMaterial")andthe3subsequentchapters("10.
Assembly of the Mechanical Parts", "11. Mounting of the Electrical Components" and "12. Final Work") generally are only relevant for
purchasers of the maker construction kit. Owners of the preassembled device can skip those chapters.
However, the chapters are helpful when there is an error or smaller repairs are necessary.
Preassembled device
• Hexkey4mm
Maker-construction kit
• Differentscrewdrivers(cross-headandslotted)
• Hexkey1.5mm/2mm/2.5mm/3mm/4mm
• Externalhexkeysocketwrenches4mm/5mm/5.5mm/6mm/7mm
• Externalhexkeyopen-endedwrenches5mm/6mm/7mm/8mm/10mm/11mm/13mm
A hexagon socket wrench or a hexagon spanner may be used in some cases.
• Hammer
• Stopangle
• Calliper
• Wirecutter
• Smallatpliersandsmalllong-nosepliers
• Threadlockervarnish,mediumstrength
• Feelergauge0.3mm
• Multimeterforvoltagemeasuring(300mV/500mV);measurementrange<1V