User manual

132

20. Firmware Update

ThermwareofthemainPCBisupdatedfrequentlytooptimisethepropertiesofthe3Dprinter.

Thecurrentlyinstalledrmwareversionofyourprinterisbrieydisplayedintheupperdisplaylineafterswitchingontheprinter.

Newversionsofthermwarearecontainedinthedownloadpackage"BUNDEL_Vx_x_x_RENKFORCE_RF500".

Update process

TheprintermustbeconnectedtotheUSBinterfaceofthecomputerandmustnotbeconnectedtoanyothersoftware(for

Repetier-Host,e.g.click"Separate").

UseonlyArduinoversion1.6.5.Thelinksfordownloadcanbefoundbeloworinthedownloadpackage.Therstlinkleads

tothemainpage.Youcanndthedownloadtherein"PREVIOUSRELEASES".Thesecondlinkdownloadstherightversion

asaZIPleandthethirdlinkasEXEleforinstallation.

https://www.arduino.cc/en/Main/Software

https://www.arduino.cc/download_handler.php?f=/arduino-1.6.5-r5-windows.zip

https://www.arduino.cc/download_handler.php?f=/arduino-1.6.5-r5-windows.exe

• UnpackthedownloadedArduino

software.

• Executethele"arduino.exe"(folder"Arduino"anditsversionsubfoldersuntilyoundthele"arduino.exe").

• Inthemenu"Tools"(1),selectoption"Board"(2)andsetthetype"Arduino/GenuinoMegaorMega2560"(3).