User manual

108
The display switches back automatically to the main menu.
Then move the axes to their home positions.
The extruder is heated up.
Once the extruder has reached its operating temperature, printing
starts.Thedisplayshowsthepositionsoftheindividualaxes(7).The
already-printed time is placed below this.
When the fan starts to run, the current speed is displayed under the
fansymbolin%(6).
When printing is completed, the printing plate moves all the way
down. The heating of the extruder is automatically switched off.
Printingisthuscompleted.Youcanremovetheprintedobjectaftera
brief cooling phase.
Duringtherstcentimetresofprinting,thedistancebetweentheprintingplatesupportandextrudercanbecarefullyne-adjustedmanuallywith
the 4 knurled screws at the bottom of the pressure plate. Turn all 4 knurls alternatingly and observe the printed line.
Forthissetting,observethattheextrudermustnottouchtheprintingplatesupportsinceitmaybedamagedotherwise
(lossofwarranty/guarantee).