Manual

4
6 Getting started
CAUTION
Serrated cutting edge
Risk of cuts
● Do not touch edge
● Keep fingers and hands away when tearing off paper
Step 1
Push the release button and open the cover.
Step 2
Install the paper roll.
1. Turn the paper roll so that the thermo-
sensitive layer is facing down.
2. Load the paper roll into the printer as
shown above. Mind cutting edge!
Step 3
Pull out some paper then close and lock the
cover.
Step 4
Tear off the excess paper. Mind cutting
edge!
Step 5
Connect the printer to the power supply:
1. Connect the power adaptor cable to the
power input socket at the rear of the
printer.
2. Connect the mains cable to the power
adaptor.
3. Connect the power adaptor to a suitable
mains socket.
Next steps
■
Read the operating instructions. Down-
load the operating instructions from
www.conrad.com/downloads.
■
Install necessary drivers and software on
your computer. Download software and
drivers from www.conrad.com/
downloads.
7 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
8 Technical data
8.1 Power adapter
Input .............................................. 100 - 240 V/AC, 50/60 Hz, max. 2 A
Output ............................................ 24 V/DC, 2 A, 48 W
8.2 Environment
Operating temperature .................. +5 to +40 °C
Operating humidity ........................ 30 - 85 % RH (non-condensing)
Storage temperature ...................... -20 to +50 °C
Storage humidity ............................ 30 - 85 % RH (non-condensing)
8.3 Others
Dimensions (W x H x D) (approx.) . 145 x 146 x 195 mm
Weight (approx.) ............................ 1.8 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2734627_V1_0823_jh_mq_en 9007200205477259-2 I2/O1 en