Manual

17
12. Basic operation
12.1. Powering on and off
1. To power on, move the power switch to position 1.
> The indicator Power lights up.
> The buzzer emits a short buzz.
2. To power off, move the power switch to position 0.
NOTICE: Do not unplug the power cable if the printer is powered on to prevent product damage.
Move the power switch to position 0 before unplugging.
13. Printing
13.1. Feeding paper out
Prerequisites:
> The cover is closed.
◼ Press the button Feed to feed out a small amount of paper.
◼ Press and hold the button Feed to continously feed out paper. Release the button to stop.
13.2. Printing a self-test page
The self-test checks and prints current printer settings.
1. (If not installed) Install the Windows® Label Printer Utility. Refer to “Configuring printer with
Windows® Label Printer Utility” for instructions.
2. Open the Windows® Label Printer Utility.
3. Select the printer for which you want to print a self-test page.
4. Click the button Printer Test … to print a self-test page.