Manual

12
10. Technical data
Item
Parameter
Printing
parameter
Printing method
Direct thermal line printing
Resolution
Default 203 dpi, 180 dpi can be emulated
Printing width
72 mm (576 dots）
Printing speed
Max. 250 mm/s
Print density
Adjustable from degree 1 to degree 4
Printing Direction
Vertical and horizontal
Interface
Default
Built-in USB, RS232, LAN
Auto cutter
Partial Cut
Page mode
Supported
Memory
RAM
2 MB
Flash
4 MB
Character set
Font
Font A:12*24 Font B:9*17 CHN: 24*24
Number of Columns
48/64
Alphanumeric
95
Expanded Character
128*47
Code page
47
Graphics
Support bitmap printing with different density and user-defined
bitmap printing (Max. 256K for total)
Barcode
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128,
CODE93
2D
PDF417, QR code
Detection
Sensor
Paper end, cover open, over-temperature and high/low voltage
sensors
Power supply
Input
100 -240 V/AC, 50/60 Hz, 2.0 A
Output
24 V/DC ±5%, 2 A
Paper
Paper loading
Easy-loading structure of upward open cover
Paper type
Standard thermal paper
Paper width
79.5 ± 0.5 mm/57.5 ± 0.5 mm (with 25.4 mm spacer)
Paper thickness
0.056 - 0.1 mm
Paper roll diameter
Max. 83 mm