Manual

4
6 Getting started
Step 1
Use both of your index fingers and pull the
buttons forward to open the top cover.
Step 2
Pull out the paper roll holder. Rotate the pa-
per roll holder to match the core diameter of
the paper roll.
Step 3
Insert the paper roll into the holder and then lock the holder. Pull out some paper.
Thermosensitive layer
Step 4
If you do not print with black mark paper,
center the gap sensor.
Step 5
Close the cover and tear off the excess pa-
per.
Step 6 Next steps
Connect the printer to the power supply.
1. Connect the power adaptor cable to the
power input socket on the printer.
2. Connect the mains cable to the power
adaptor.
3. Connect the power adaptor to a suitable
mains socket.
■
Read the operating instructions. Down-
load the operating instructions from
www.conrad.com/downloads.
■
Install necessary drivers and software on
your computer. Download software and
drivers from www.conrad.com/
downloads.
7 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
8 Technical data
8.1 Power adapter
Input .............................................. 100 - 240 V/AC, 50/60 Hz, max. 0.8 A
Output ............................................ 12 V/DC, 2 A, 24 W
8.2 Environment
Operating temperature .................. +5 to +40 °C
Operating humidity ........................ 30 - 85 % RH (non-condensing)
Storage temperature ...................... -20 to +50 °C
Storage humidity ............................ 30 - 85 % RH (non-condensing)
8.3 Others
Dimensions (W x H x D) (approx.) . 2734624: 186 x 133 x 128 mm
2734625: 188 x 134 x 150 mm
Weight (approx.) ............................ 2734624: 805 g
2734625: 880 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2734625 2734624_V1_0723_jh_mq_en 9007200147062027-2 I2/O1 en