Instructions

Product overview
1 2 3 4 5 6
7 98 10 11 12
2.1 A
2.4 A
1 A
1 Metal plate
2 Holder
3 Cable clamp
4 Ball pan
5 Clamp ring
6 Ball head
7 Gooseneck
8 Power indicator
9 USB input
10 Plug
11 Fuse (hidden)
12 Rotating ring
Operation
Do not use with mobile devices that contain a hard drive. Hard drives are damaged
by the holder’s magnetic force. You must observe the related instructions in your
mobile device’s operating instructions before use with the holder.
Do not use with wireless chargers and technologies (e.g. Qi). The metal plate can
become very hot and cause damage and injury.
• Mount the holder, referring to the illustration. Slightly tighten the clamp ring (5).
• Attach the included metal plate (1) to the back of your smartphone or its protective case using the adhesive
tape (if the metal plate is already seated on the holder (2), remove it before attaching the smartphone).
• Plug the plug (10) into the cigarette lighter socket in your vehicle (12 – 24 V on-board voltage). The power
indicator (8) turns on.
• Place the metal plate with smartphone on the holder. The metal plate is held to the holder by magnetic
force.
• Position the gooseneck (7) and the holder. Tighten the clamp ring to secure the holder’s position.
- Please hold the plug (10) tightly when changing the position to prevent damage to the cigarette lighter
socket.
• The USB inputs (9) are intended for charging smartphones/tablets. Connect the supplied charging cable or
another suitable charging cable with the USB inputs. Always turn off the device you wish to charge before
connecting and disconnecting it.
- Please observe the USB inputs’ maximum charging currents (see illustration).
- Do not exceed the maximum current consumption of all USB inputs (see Technical data).
- Run the charging cable through the cable clamp (3).
- Please note that charging when the engine is off may run down your vehicle’s battery.
• Always unplug the product from the cigarette lighter socket when it is not in use.
• If the product does not respond, check the fuse (see chapter “Care and cleaning > a) Fuse replacement”).
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
a) Fuse replacement
• Remove the rotating ring (12) by unscrewing it counter clockwise.
• Remove the fuse and insert a new one of the same type (see Technical data).
• Replace the rotating ring by screwing it on clockwise.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste. Always
dispose of the product according to the relevant statutory regulations.
 Youthusfullyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.
Technical data
Input voltage ......................................... 12 – 24 V/DC
Output voltage ...................................... 5 V/DC (via USB connection)
Output current ....................................... max. 5.5 A (2.1 A / 2.4 A / 1 A)
Fuse ...................................................... F3AL 250V
Suitable smartphones ........................... Weight: max. 750 g
Display: max. 20.3 cm (8”)
Cable length ......................................... 44 cm
Operating conditions ............................. -10 to 40 °C, 10 – 90 % RH
Storage conditions ................................ -20 to 60 °C, 5 – 95 % RH
Dimensions (L x W x H) ........................ 56 x 58 x 253 mm
Weight .................................................. 150 g
Operating instructions
Universal in-car magnetic smartphone holder
Item no. 1581257
Intended use
The smartphone holder connects to the cigarette lighter socket in your vehicle (12/24 V on-board voltage).
Your smartphone or its protective case is adhered to the metal plate and held in place due to the holder’s
magnetic force. You can charge your smartphone via a USB connection on the smartphone holder.
The product is protected against over-voltage, overload, overheating and short-circuiting.
The product may only be operated in the protected interior of a vehicle.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazardssuchasashortcircuit,reorelectricshock.Readtheinstructionscarefullyandstoretheminasafe
place. Make this product available to third parties only together with its operating instructions.
This product complies with statutory national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
• Smartphone holder
• USB charging cable
• Metal plate
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code on this page.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your health, e.g. due
to an electric shock.
This symbol is used to highlight important information in these operating instructions. Always
read this information carefully.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture,ammablegases,vapoursandsolvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance,modicationsandrepairsaretobeperformedexclusivelybyanexpertorata
qualiedshop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Product
• Unplug the product while it is not in use.
• Make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Theproductmaybecomehotduringuse.Makesurethatthereissufcientventilation,and
never cover the product during operation.
• Do not short-circuit the USB outputs.
• Do not use the product while driving.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
Allrightsincludingtranslationreserved.Reproductionbyanymethod(e.g.photocopying,microlming,orthecapturein
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1581257_v1_1017_02_jh_m_en_(3)