Information

ManualsBrandsRENKFORCE ManualsScannersBook scanner A4 RF-BS-1000 2592 x 1944 pix

• Never use the product immediately after it has been brought from a cold room into a warm one. The

condensation generated could destroy the product. The mains adapter may also generate a fatal electric

shock!

Allow the product to reach room temperature before connecting it and putting it to use. This may take

several hours.

• Always comply with the accident prevention regulations for electrical equipment when using the product

in industrial facilities.

• Protect the product from direct sunlight. Operate and store the product only in indoor areas protected

from sunlight.

• Warning, LED light:

Do not look directly at the LED light!

Do not look into the beam directly or with optical instruments!

• Consult a technician if you are not sure how to use or connect the product.

• Maintenance, modications and repairs are to be performed exclusively by an expert or at a qualied shop.

b) Important notes

• The OCR software license can only be installed and registered once for a computer. Therefore, make

sure that your computer meets the necessary technical preconditions for this. When commissioning make

absolutely sure, that the projected image of the scanner appears on the monitor, before you register the

OCR software license on the Internet.

• Malfunctions may occur when connecting to a USB 3.0 port. Therefore only connect the product to a

USB 2.0 port.

Cleaning and care

• Always disconnect the product from the power supply before cleaning it.

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the

casing or cause the product to malfunction.

• Use a dry, lint-free cloth to clean the casing.

• To clean the scanner window use only a clean cloth slightly moistened with water. Dry the scanner window

carefully before the next period of operation.

Disposal

Electronic devices are recyclable waste and must not be placed in household waste. Always

dispose of the product according to the relevant statutory regulations.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

a) Book scanner

Operating voltage/current ..................... 12 V/DC, 5 A

Connection ........................................... USB 2.0 via PC (max. 480 Mbps)

Scanning speed .................................... approx. 1 - 2 seconds per DIN A4 page

Image sensor ........................................ 5 megapixels (resolution 2592 x 1944 pixels)

Sensor type .......................................... HD CMOS

Scanner area ........................................ 210 mm (width) x 297 mm (length)

OCR languages .................................... German, English, Chinese, Korean, Japanese

Video format ......................................... YuY2

Picture format ....................................... JPEG

USB cable length .................................. approx. 2.6 m

Power cable length ............................... approx. 1.7 m

Power adapter output cable length ....... approx. 1.17 m

Supported operating systems ............... Windows

Vista 32 bit, Windows

7, 8, 8.1, 10 and higher

Operating conditions ............................. 0 to +50 ºC, 0 – 85 % relative humidity

Storage conditions ................................ -10 to +60 ºC, 0 – 85 % relative humidity

Dimensions (W x H x D) ....................... 325 x 335 x 405 mm

Weight ..................................................approx. 8.3 kg

b) Power adapter

Input voltage/current ............................. 100 – 240 V/AC 50/60 Hz 1.5 A

Output voltage/current .......................... 12 V/DC, 5 A

IMPORTANT INFORMATION

Professional book scanner RF-BS-1000

Item no. 1576988

Intended use

The product is used to digitise books, that are placed directly on the V-shaped scanning support. The storage

of the scanned books takes place on a Windows

compatible PC, that is connected with the book scanner

via a USB 2.0 port. A CD with software is included in the scope of supply. Power is supplied via the power

adapter included with the product.

This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)

must be avoided under all circumstances.

For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for

purposes other than those described above may damage the product. In addition, improper use can cause

hazards such as a short circuit, re or electric shock. Read through this important information carefully and

keep it in a safe place. Only pass on this product to third parties together with this important information.

This product complies with statutory national and European regulations. All company and product names are

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR

code on this page. Follow the instructions on the website.

Safety instructions

Read through the Important Information carefully and observe in particular the safety

instructions. If you do not follow the safety instructions and information on proper

handling in this Important Information, we will not accept any liability for any personal

injury or property damage resulting as a consequence. Such cases will invalidate the

warranty/guarantee.

a) General information

• The product is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing material

for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,

ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized use. Safe

operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the

product.

• Always observe the safety and operating instructions of any other devices which are connected to the

product.

• Avoid the following unfavourable ambient conditions at the installationlocation and during transport:

- Dust or ammable gases, fumes or solvents

- Strong vibrations, impacts or blows

- Strong magnetic elds such as those found close to machinery or loudspeakers

• Make sure that the scanner window is not contaminated with ngerprints or soiled in any other way. Never

use chemical cleaning agents to clean the scanner window. Observe without fail the notes in chapter

“Cleaning and care”.

• The mains outlet must be located near to the device and be easily accessible.

• Only use the supplied mains adapter as a power supply.

• Only connect the power adapter to a normal mains socket connected to the public supply. Before plugging

in the power adapter, check whether the voltage stated on the power adapter complies with the voltage

of your electricity supplier.

• Never connect or disconnect power adapters if your hands are wet.

• Never unplug the mains adapter from the mains socket by pulling on the cable; always use the grips on

the plug.

• When setting up the product, make sure that the cables are not pinched, kinked or damaged by sharp

edges.

• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

• For safety reasons, disconnect the power adapter from the mains socket during storms.

• Do not touch the mains adapter if there are any signs of damage, as this may cause a fatal electric shock!

First, switch off the mains voltage to the socket to which the mains adapter is connected (switch off at the

corresponding circuit breaker or remove the safety fuse, and then switch off at the corresponding RCD

protective switch, so the socket is fully disconnected). You can then unplug the mains adapter from the

mains socket. Dispose of the faulty mains adapter in an environmentally friendly manner and discontinue

use. Replace it with a mains adapter of the same design.

• If the product is not going to be used for a prolonged period of time (e.g. storage), disconnect it from the

power supply by removing the power adapter from the mains socket.

• Never pour any liquids over electrical devices or place objects lled with liquid next to the product. If liquid

or an object does enter the interior of the device, power down the respective socket (e.g. switch off the

circuit breaker), and then remove the mains plug from the mains socket. Discontinue use and take the

product to a specialist repair centre.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming, or the capture in

electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.