User manual

 Follow the on-screen instructions for your selected mode to complete setup. You can

configure the product for 2.4 GHz and/or 5GHz Wi-Fi.

For more advanced configurations, use the browser based configuration interface at

http://renkforce.setup (refer to the user manual for more information).

6. Reset the Extender

If you experience problems with your extender or if you want to change the extender to a

different operating mode, you can reset the device back to its factory settings. This resets

all settings back to default.

 Press and hold the WPS button for at least 10

seconds and release when the green power

LED is flashing.

 Wait for the extender to restart. The extender is

ready for setup when the green power LED

displays on.