User manual

2. The green power LED will flash while the extender is starting up. The device is ready

when the green power LED displays on.

3. Use a Wi-Fi device to connect to the SSID renkforceEXT_2.4G_** or renkforceEXT_5G_

**. The last two ** characters are unique according to your device.

If you are using a computer, please disconnect any Ethernet

cables.

4. Open a web browser and if you do not automatically arrive at the “Get Started” screen

shown below, enter the URL

http://renkforce.setup

and click “Get Started” to begin the

setup process.