a. Important Information 1.1 Caution 17 During the printing or the printing has just finished, the highest temperamental of nozzle has reached fo 260°C, and the highest temperature of build platform has reached © 100°C; to ensure your safety, don't touch the 8D finished prints! nozzle / build print bide during printing or cooling process. 2 Pls use the original power wire we supply to prevent any damage to electrical pairs. 1.2 Filament Reinforce printers can be used with a wide range of filaments.
2.2 Introduction of extrude A Nozzle 2 Heat blink 2 Heater and NTO 8 Filament tube 3) Heat sink Object an Ruder fan 4 Cover of masquerader The leverage 2.
Storytelling Phe user can calibrate the print bed by the meme of level, Refer to 3.2 for detailed instructions. Laval S This user can dick emergency slop won to tir off all imitators in case of emergency.
3.4.
Gis i Ga E Hike pi i is He din Gaines HIS fii fii Son 3.4.
3.4.4 Material configuration file — Windows® In order to ease the process of sifting parameters for different materials {WaodElastic/Copper/PLAY, you can load per-configured material configuration files from the 8D card.
3.5 Print reinforcement 30 setup” SE : nn leas tof onionskin 30 Sep ! ST sme es hi BASES EE Bh beneficial Bd fii. Beach no i Tots se PEAT Lo : va ips spas hay ner a iti.
Cleaning and maintenance Never use-digressive detergents; rubbing alcohol brother chemical solutions, ds these could damage the Casing or even Impair the functioning of the Product. Never submerge the underproduction, anger of bums! Donor ouch the hot noes directly with bare hands. a) Clear the device «Use dry, Soft cloth or brush io clan the Git side oF the 30 printer.
«} Clean the inside-of the extrude Heat up the nozzle tithe preset temperature, press the filament leverage, and push down the elector rod through the hessian then pull up and down repeatedly until the heat sink & metal tube is clean and the impurity comes out. " sm ele Far .
Load and armload lament. Disposal Electronic devices are recyclable waste and mist nat be placed Tn household waste, Al the end of its service fife, dispose of the product according lo the relevant statutory regulations.
