Fantasia Creating fantasy in your cup! User Manual Before operating this unit, please read these instructions thoroughly.
Introduction Touch screen FancyBox replacement lid Operating light Power Power switch switch Tray Tray Power port port Power FRONT BACK
Preparation Open the FancyBox replacement lid and remove the X-axis locking rod, Please complete the following steps before you use the machine ① Open the FancyBox-replacement lid ② Screw off the locking rod from position A (See Figure 1 below) ③ Screw in the locking rod to position B (See Figure 2 below) Figure 1 Position Figure 2 Position Note: Please screw off the lock rod from position B and screw in it to position A during the course of transportation(See Figure 2) Connect the machine to the
Restrictions in use Do not use the machine in environments described below in order to avoid electric shocks, fire or other damage. 1. Easy to dump and other unstable surfaces 2.
Usage Upload image simply by scanning QR code or input URL Select the image and adjust the cup size, image brightness and contrast Print the image or text onto your favorite frothy beverage Replacing the FancyBox Cartridge 1.
Product parameters Product model EB-FT3 Electric parameters AC 110V~240V 50/60Hz Outline size 27cm x 34cm x 41cm Cup height 5cm~18cm Net Weight 10kg Cup diameter 4cm~10cm Network parameters: WiFi 802.11b/g/n Operating power 200W Operating Frequency Range Transmission Power <10mW 2.400-2.4835 GHz Further Information Transportation 1. For transportation, please move lock rod from poistion B back to Poistion A. 2.
2. For best printing results, put the cup in the center of tray 3. Don't touch the moving parts with your hands or objects, to avoid injury or damage. Power Supply 1. Don’t twist or bend the power cord. 2. When disconnect the power cord, grasp and pull the connector, not the cord. 3. Please do not connect the supplied cable to other sockets or devices 4. Do not open the rear cover unless you are a trained technician. 5.
www.evebot.
