User manual
Operating instructions
Universal car mount for smartphones
Item no. 1233050
Intended use
The universal car mount for smartphones is designed to secure mobile devices of a
UWKVCDNGUK\G6JGRTQFWEVECPJQNFCOQDKNGFGXKEGYKVJCYKFVJQH|OO6JGECT
mount is secured to a glass surface such as the windscreen in the interior of a car.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
ƜTG GNGEVTKE UJQEM GVE 4GCF VJG KPUVTWEVKQPU ECTGHWNN[ CPF MGGR VJGO /CMG VJKU
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
EQORCP[PCOGUCPFRTQFWEVPCOGUCTGVTCFGOCTMUQHVJGKTTGURGEVKXGQYPGTU#NN
rights reserved.
Delivery content
r Universal car mount for smartphones
r Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
r The device is not a toy. Keep it out of the reach of children and pets.
r &Q PQV NGCXG RCEMCIKPI OCVGTKCN N[KPI CTQWPF ECTGNGUUN[ 6JGUG OC[
become dangerous playing material for children.
r Protect the product from extreme temperatures, direct sunlight, strong
LQNVUJKIJJWOKFKV[OQKUVWTGƝCOOCDNGICUGUXCRQWTUCPFUQNXGPVU
r Do not place the product under any mechanical stress.
r +H KV KU PQ NQPIGT RQUUKDNG VQ QRGTCVG VJG RTQFWEV UCHGN[ VCMG KV QWV QH
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- KUPQNQPIGTYQTMKPIRTQRGTN[
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
r Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
r Also observe the safety and operating instructions of any other devices
which are connected to the product.
r Consult an expert when in doubt about operation, safety or connection of
the device.
r /CKPVGPCPEGOQFKƜECVKQPUCPFTGRCKTUCTGVQDGRGTHQTOGFGZENWUKXGN[
D[CPGZRGTVQTCVCSWCNKƜGFUJQR
r If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
21 3
4
1 Suction pad
2 Knurled nut for star-shaped grip
(not visible)
3 Holder
4 Cam lever
Operation
When choosing the mounting surface, ensure that you always have a clear
view of the road and will not be distracted when driving. In addition, pay
attention to all statutory restrictions relating to the use of mobile phones in
cars.
r /QXGVJGECONGXGTWRYCTFUVQRTGRCTGVJGUWEVKQPRCFHQTOQWPVKPI4GOQXG
CP[FWUVQTƝWƛ9KRGVJGUWEVKQPRCFEQORNGVGN[ENGCPCPFFT[
r Position the suction pad on a smooth glass surface free from dust and fat.
r Press the suction pad tightly to seal it to the surface in the desired orientation and
OQXGVJGECONGXGTFQYPYCTFUWPVKNKVENKEMUKPVQRNCEG
r 5NKIJVN[WPUETGYVJGMPWTNGFPWVQPVJGCTOQHVJGECTOQWPVVQCFLWUVVJGJQNFGT
5ETGYVJGMPWTNGFPWVDCEMKPVQCVKIJVGTRQUKVKQPVQVGORQTCTKN[ƜZVJGJQNFGT
to the desired position.
r Pull the movable jaw on the holder outwards to secure your smartphone. Place your
UOCTVRJQPGKPVQVJGJQNFGTKPVJGFGUKTGFQTKGPVCVKQPCPFNGVIQQHVJGLCYVQƜZ[QWT
phone into place. To remove your phone, follow the above steps in reverse order.
r If the car mount is to be removed from the glass surface, always remove the
UOCTVRJQPGƜTUV
r /QXGVJGECONGXGTWRYCTFUVQTGOQXGVJGECTOQWPV2WNNVJGRNCUVKEƝCRQPVJG
DCUGQHVJGUWEVKQPRCFVQYCTFU[QWYKVJQPGƜPIGTVQTGOQXGVJGECTOQWPVGCUKN[
6JGUWEVKQPRCFEQOGUQƛHTQOVJGUWTHCEG
Maintenance and cleaning
r Never use any aggressive detergents or chemical solutions.
r %NGCPVJGUWEVKQPURCFUGXGT[VQOQPVJUYKVJCUNKIJVN[FCORENQVJ4GOQXGVJG
RTQFWEVHTQO VJGOQWPVKPIUWTHCEGTGOQXG VJGCƞZGF FGXKEGHTQOVJGUWEVKQP
pad. Use a mild detergent if the product gets very dirty. Let the suction pads dry out
completely before attaching them to the mounting surface or attaching a device.
r #FT[UQHVCPFENGCPENQVJKUUWƞEKGPVHQTENGCPKPIVJGRNCUVKERCTVUQHVJGRTQFWEV
Dust can be removed easily using a soft and clean long-haired brush and a vacuum
cleaner.
Disposal
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
;QW VJWU HWNƜN [QWT UVCVWVQT[ QDNKICVKQPU CPF EQPVTKDWVG VQ VJG RTQVGEVKQP QH VJG
environment.
Technical Data
Suitable for mobile devices with a width of .. 58 - 85 mm
/CZNQCFECRCEKV[ ............................................ MI
Suction pad height ............................................. 16 mm
Suction pad Ø ..................................................... 55 mm
Operating conditions ......................................... VQ%4*
Storage conditions............................................. VQ%4*
Dimensions (W x H x D)..................................... 8.5 x 10.5 x 11 cm
Weight .................................................................. approx. 67 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
#NN TKIJVU KPENWFKPI VTCPUNCVKQP TGUGTXGF 4GRTQFWEVKQP D[ CP[ OGVJQF GI RJQVQEQR[ OKETQƜNOKPI QT VJG ECRVWTG KP GNGEVTQPKE FCVC
RTQEGUUKPIU[UVGOU TGSWKTGVJG RTKQTYTKVVGP CRRTQXCND[VJGGFKVQT4GRTKPVKPICNUQ KPRCTV KURTQJKDKVGF6JKURWDNKECVKQPTGRTGUGPVVJG
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE. V1_1114_02-DS