Instructions
34
Caution!
Set the pressure between 1.8 and 2.0 bar. Never pressurize as this may damage the pressure vessel and/
or the pressure switch. This will void the warranty.
13. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product according to the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the environment.
14. Technical data
a) General
Operating voltage .............................................230 V/AC, 50 Hz
Protection class ................................................I
Protection type ..................................................IPX4
Self-priming ......................................................yes
Excess temperature protection .........................yes
Dry run protection .............................................no
Suction depth ....................................................max. 8 m
Install a return stop at the end of the suction hose.
Conveying means .............................................Clean, clear fresh water
Particle size/dirt ................................................max. 1 mm
Mount a suitable water lter (coarse and ne lter) on the suction side. This prevents contamination of the
pump and the pressure switch; in addition, the ingress of dirt is prevented in the lines on the pressure side.
The temperature of the ow medium ................max. +35 °C
Pressure for pressure vessel ............................1.8 - 2.0 bar
Connection thread ............................................G1 (IG) inside 30.3 mm (1”)
Sound pressure level ........................................<85 dB(A)
Connection cable ..............................................H07RN-F, 3G 1.0 mm², length approx. 1 m
Operating conditions .........................................0 to + 50 ºC, ≤ 90% relative humidity
Storage conditions ............................................+5 to +40 ºC, ≤ 90% relative humidity