User manual
Getting started
Turn off the computer.
Connect the USB adapter cable to a free USB type C port on your computer.
Important!
The USB type C port must be able to deliver video data (DisplayPort-compatible).
You cannot connect the adapter to a standard USB type C port that can deliver USB
data only (for example, a USB stick or similar). The adapter is not a regular USB
graphics card.
Read the instruction manual of the computer if your computer has multiple
USB type C ports to nd out which port to use for connecting the adapter. Typically,
only one of the USB type C ports can deliver video data, while the others are used
for the data only transmission to a USB stick, for example, or similar.
Connect your monitor to one of the outputs.
Important!
You cannot use all of the outputs at the same time. Note the following restrictions:
- HDMI output and VGA output can be used simultaneously.
- DVI-D output and VGA output can not be used simultaneously.
- DisplayPort output can only be used individually.
No cable/monitor should be connected to the other ports. A connected monitor may
not display any images, if this is not followed!
Turn on the computer again. The drivers required are included in the operating system and will
install automatically.
Care and cleaning
• Disconnect the product from the mains supply before each cleaning procedure.
• Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the casing or even impair operation.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable materials and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations. That way you full your statutory obligations and contribute to the
protection of the environment.
Technical data
Operating voltage ............................... 5 V/DC
Power consumption ............................ max. 3 A
USB standard ..................................... USB 3.1
Outputs ............................................... 1x DisplayPort; 1x HDMI; 1x DVI-D; 1x VGA
Resolution ........................................... DisplayPort: 3840 x 2160 @ 30 Hz
............................................................ HDMI: 3840 x 2160 @ 30 Hz
............................................................ DVI-D: 3840 x 2160 @ 30 Hz
............................................................ VGA: 1920 x 1080 @ 60 Hz
Cable length ....................................... approx. 10 cm
System requirements .......................... Windows 7 and later, MacOS 10 and later
Operating conditions ........................... Temperature -10 °C to +60 °C, 10% to 85% relative
humidity, noncondensing
Storage conditions .............................. Temperature -20 °C to +75 °C, 10% to 85% relative
humidity, noncondensing
Dimensions (L x W x H) ...................... 100 x 50 x 15.2 mm
Weight ................................................ 66 g
Operating instructions
USB type C Beamer Adapter
Item no. 1574945
Intended use
The product is intended for connection to a USB type C port that can deliver video data (Dis-
playPort-compatible). This video data is then delivered via the various outputs of the adapter
(which cannot be used at the same time, see chapter “Getting Started”) to a suitable projector
or monitor.
For safety and compliance reasons, the product must not be converted or modied in any way.
If you use the product for other purposes than those described above, the product may be dam-
aged. Moreover, improper use involves risks such as short-circuits, re, electric shocks, etc.
Please read the operating instructions carefully and do not discard them. Please include these
operating instructions when you pass the product on to a third party.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• Adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol indicates specic tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• Never use the product immediately after moving it from a cold room into a warm
one. The condensation that forms may damage the product under certain circum-
stances. Allow the product to reach room temperature before connecting it to the
power supply and putting it into use. In some cases, this may take several hours.
• When setting up the product, make sure that the cables are neither kinked nor
pinched.
• If you have doubts about how the product should be operated, its safety or how to
connect it, consult a qualied technician.
• Maintenance, adjustment and repair work should only be carried out by an expert
or a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE. 1574945_V2_0718_02_VTP_m_en