User manual

Technical Support Contact

Address : 2F, 628, Donghang-ri, Yangseong-myeon, Anseong-Si, Gyeonggi-Do, Korea.

Tel : +82 70 4100 8847 / Fax : +82 31 674 6608

E-mail : info@c4line.com

Website : www.c4line.com

C4L6400-TWP-P Transceiver Field Application

C4L6400-TWP-P transceivers are used to extend the Ethernet IP signals via Cat 5E , Cat 6 or 2 wire

cable in the existing UTP network in building.

C4L6400-TWP-P transceiver could reduce the cabling costs to upgrade from the installed analog video

cameras to Mega-pixel grade IP cameras with the inexpensive UTP cabling.

For the other field applications, C4L6400-TWP-P transceivers could be applied to connect, distribute and

convert the IP devices(IPTV, VOIP Phone, Wireless AP, etc.) signals via the UTP cable with 128bit AES

Encryption and guaranteed QoS for loss sensitive application.

C4L6400-TWP-P Transceiver

Quick Start Guide

PAGE 1
C4L6400-TWP-P Transceiver Quick Start Guide C4L6400-TWP-P Transceiver Field Application Technical Support Contact Address : 2F, 628, Donghang-ri, Yangseong-myeon, Anseong-Si, Gyeonggi-Do, Korea. Tel : +82 70 4100 8847 / Fax : +82 31 674 6608 E-mail : info@c4line.com C4L6400-TWP-P transceivers are used to extend the Ethernet IP signals via Cat 5E , Cat 6 or 2 wire cable in the existing UTP network in building.
PAGE 2
C4L6400-TWP-P connection diagram Step 1.Un-Joining to build enhanced encrypted network • Do this by applying 48VDC power, and pressing the small push-button (Grp) for 10 seconds until the TWP and PoE LEDs illuminate and then go out, about one seconds. The transceiver is now ready to be joined to build encrypted Network Group. Step 2. Joining mode • For more transceivers in an enhanced encrypted network, disconnect the joined transceiver from grouped UTP cable and connect the new un-joined transceiver.