Instructions

28
b) DMX Operation
 EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythe
controller.ThisDMXstartingaddressspeciestherstDMXchanneltowhichtheeffectlightresponds.The
remainingcontrolchannelscomeafterthisrstDMXchannel(DMXstartingaddress).
The effect light requires 7 free DMX channels.
• Push the button MENU (5), until "d" shows in the display (4), followed by a number. The number is the DMX start
address.
• Select the desired starting address 001-512 with the UP (6) and DOWN (7) buttons.
• If you operate several effect lights in a DMX chain, you can also set the DMX start address as follows.
This ensures that every effect light is assigned its 7 DMX channels and that the DMX channel groups follow
in sequence.
Push the button MENU (5), until "IP" shows in the display (4), followed by a number. The digit is the number of the
effect light in the DMX chain.
"IP.01" assigns the 1st effect light DMX channels 1-7
“IP.02" assigns the 2nd effect light DMX channels 8-14 and so on.
Up to 73 effect lights can be encoded this way.
The following table provides information about the effects of the settings on the individual DMX channels.
DMX channel Value Function Comment
1 000-010 Colour setting via channel 4-7 Channel 2 and 3 without function
011-050 static colours Colour selection with channel 2
Channel 3-7 without function
051-100 Colour change function Speed via channel 3
Channel 2 and 4-7 without function
101-150 Fade function Colour selection with channel 2
Speed via channel 3
Channel 4-7 without function
151-200 Sound-to-light function Colour selection with channel 2
Channel 3-7 without function
201-255 Strobe effect Colour selection with channel 2
Speed via channel 3
Channel 4-7 without function
2 000-255 Colour selection
3 000-255 Speed
4 000-255 Overall brightness dark >> bright only active when channel 1= 000-010
5 000-255 Brightness red dark >> bright only active when channel 1= 000-010
6 000-255 Brightness green dark >> bright only active when channel 1= 000-010
7 000-255 Brightness blue dark >> bright only active when channel 1= 000-010