Instructions

27
11. Operation
a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
• The operating modes are set in the menu via the display (4) and the buttons MENU (5), UP (6), DOWN (7) and
ENTER (8).
• Press the MENU (5) button to select the individual menu items.
• Change the values to be set or options with the UP (6) or DOWN (7) buttons.
• To get to the 2nd menu level (2nd option) or to save values, push the button ENTER (8).
The display (4) switches off automatically after a few seconds without any button being pushed. Push any
button to reactivate it.
When the integrated controller at the DMX IN (1) connection recognises a DMX signal, the DMX (9) display
ashes.
Menu Overview
For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item 1. Option 2. Option Function
d d001-d512 DMX-mode with setting of the DMX address
IP IP.01-IP.73 DMX addressing for operation in effect light groups
A1 A1.01-A1.10 Automatic mode, 10 static colours
A2 A2.01-A2.32 Automatic mode, colour change, 32 speed levels
A3 A3.01-A3.11 A3.01-A3.32 Automatic mode, 11 fade effects, 32 speed levels
A4 A4.01-A4.11 A4.01-A4.04 Sound-to-light mode, 11 colours, 4 sensitivity levels
A5 A5.01-A5.11 A5.01-A5.32 Strobe mode, 11 colours, 32 speed levels
A6 A6.01 Automatic mode, different effects without setting option
A7 A7.01-A7.11 A7.01-A7.32 Automatic mode, 11 scroll effects, 32 speed levels
r r.000-R.255 Brightness red
G G.000-G.255 Brightness green
b b.000-B.255 Brightness blue