Instructions

31
12. Handling
• Neverconnectthemainsplugtoamainssocketimmediatelyafterthedevicehasbeentakenfromacold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Neverpluginorunplugthemainsplugwhenyourhandsarewet.
• Neverpullthemainsplugfromthemainssocketbythecable.Onlypullitfromthemainssocketbythe
intended grip areas.
• Unplugthemainsplugfromthemainssocketifyouarenotusingthedeviceforanextendedperiodof
time.
• Disconnectthemainsplugfromthemainssocketduringthunderstormsforreasonsofsafety.
• Donotcoverthedevicetoensuresucientventilation.Aircirculationalsomustnotbeimpairedbyany
objects like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m
around the device.
13. Maintenance
Regularlycheckthetechnicalsafetyoftheeectbeamer,e.g.fordamagetothemainscableorthecasing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately
and make sure it is not operated unintentionally. Pull the mains plug from the mains socket!
It can be assumed that safe operation is no longer possible if:
• thedeviceisvisiblydamaged
• thedeviceislongerworking
• thedevicehasbeenstoredunderunfavourableconditionsforanextendedperiodoftimeor
• thedevicehasbeensubjectedtoheavystressduringtransport.
Always observe the following safety instructions before cleaning or servicing the eect beamer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must per-
form repairs.
The outside of the eect light should only be cleaned with a soft, dry cloth or brush.
Never use any aggressive cleaning agents or chemical solutions as these may damage the surface of the
casing.