Instructions

29
8-channel DMX operation
DMX channel Value Function
1 000-255 Brightness red 0-100%
2 000-255 Brightness green 0-100%
3 000-255 Brightness blue 0-100%
4 000-255 Brightness white 0-100%
5 000-255 Total brightness 0-100%
6 (CH8 = 000-059) 000-006 No strobe eect
007-065 Strobe speed slow > fast
066-069 Light o
070-128 Pulsing strobe eect slow > fast
129-132 Light o
133-191 Colour strobe with fade-in eect slow > fast
192-195 Light o
196-255 Colour strobe with fade-out eect slow > fast
6 (CH8 = 060-255) 000-255 Speed setting for channel 8
7 (CH8 = 060-119) 000 Light o
001-255 Colour selection (channel 8 = 060-119)
8 000-059 Channel 1-6 activated
060-119 Colour selection via channel 7 / strobe speed via channel 6
120-179 Colour change eect / speed via channel 6
180-239 Fade eect / speed via channel 6
240-255 Sound-to-light eect / reaction sensitivity via channel 6
c) Master-Slave Mode
• Selectthedesiredoperatingmodeinthemenuofthemasterdevice.
• ActivatetheoperatingmodeSLAVonallslavedevices.
Only one device in a master-slave-chain must be defined as master device. All other devices
must be defined as slave devices.
d) Sound-to-Light Mode
• SetSOUninthemenutooperatethedeviceinsound-to-lightoperation.
• UseSd01-Sd30toselectthetriggersensitivityoftheinstalledmicrophone.
The eect light is controlled via an installed microphone in time with the music in this mode.