Instructions

28
b) Use with an External DMX Controller
EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythe
controller. This DMX starting address specifies the first DMX channel to which the eect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
 Theeectlightrequires4,6or8freeDMXchannelsdependingonDMXoperatingmode.
Setting the DMX starting address
• SetthedesiredDMXstartingaddress(A001-A512)inthemenuAddr.
Setting the DMX operating mode
• SetthedesirednumberofDMXchannelswiththeoption4CH/6CH/8CHinthemenuCHnd.
The following tables provide information about the eects of the settings on the individual DMX channels.
4-channel DMX operation
DMX channel Value Function
1 000-255 Brightness red 0-100%
2 000-255 Brightness green 0-100%
3 000-255 Brightness blue 0-100%
4 000-255 Brightness white 0-100%
6-channel DMX operation
DMX channel Value Function
1 000-255 Brightness red 0-100%
2 000-255 Brightness green 0-100%
3 000-255 Brightness blue 0-100%
4 000-255 Brightness white 0-100%
5 000-255 Total brightness 0-100%
6 000-006 No strobe eect
007-065 Strobe speed slow > fast
066-069 Light o
070-128 Pulsing strobe eect slow > fast
129-132 Light o
133-191 Colour strobe with fade-in eect slow > fast
192-195 Light o
196-255 Colour strobe with fade-out eect slow > fast