Instructions

27
11. Operation
a) Setting the Operating Mode
The eect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected eect
lights synchronously in master-slave operation, or as slave device via the controller of another eect light.
The operating modes are set in the menu via the display (1) and the function buttons MENU (3), UP (2),
DOWN(7)andENTER(6).
• MENU(3)=Selectionofthemainmenuitems/returntothemainmenulevel
• UP(2)undDOWN(7)=Movementinthemainmenulevel/changestosetvalues
• ENTER=Optionselection/conrmationofsettings
Overview of the setting options for the operating mode
Display Option Function
Addr A001-A512 Selection of DMX starting address
CHnd 4CH / 6CH / 8CH DMX operation with 4 / 6 / 8 channels
SLAV Slave mode
SOUn Sd01-Sd30 Sound-to-light mode with sensitivity setting
AUtO Automatic mode
FLSH FL00-FL51 Setting the strobe speed at static colours (COLO)
JUNP JU01-JU99 Colour change eect / Setting colour change speed
FL00-FL04 Colour change eect / Setting strobe speed
FAdE FF01-FF99 Fade eect / Setting speed
COLO C000-C255 Selection of dierent static colours
NAnU r000-r255 Static colour, brightness red
G000-G255 Static colour, brightness green
b000-b255 Static colour, brightness blue
U000-U255 Static colour, brightness white
dISP NO / YES Display alignment (NO = normal / YES = turned)