Instructions

i) Settings for outputs 1, 2 and 3

Outputs 1,2 and 3 can be enabled/disabled in several ways

Program code Duration Conrm

4 0 1–999 seconds #

4 1 #

4 2 #

4 3 #

• The outputs can be activated for 1–999 seconds.

• They can be enabled/disabled by entering a user code.

• They can be enabled with a short user code and disabled with the full code.

Program codes 40, 41, 42 and 43 Output 1

Program codes 50, 51, 52 and 53 Output 2

Program codes 60, 61, 62 and 63 Output 3

Programming options for outputs 1, 2, and 3

• For more information about these options, refer to section D in “Overview”.

• Program codes 40, 50 and 60: The corresponding output is enabled for 1–999 seconds.

The outputs can be programmed to open the door for a duration of 1–999 seconds. The

default setting is 1 second. Enter the user code to open the door.

• Program codes 41, 51 and 61: Start/Stop mode

The outputs can be manually enabled/disabled with a user code.

• Program codes 42, 52 and 62: Start/stop mode with 2-digit start code

Theoutputscanbeactivatedwiththersttwodigitsoftheusercode.Theentireusercode

is required to disable the outputs.

Example:

User code: 8321, start code: 83

User code: 54321, start code: 54

• Program codes 43, 53 and 63: Start/stop mode with 3-digit start code

Theoutputscanbeactivatedwiththerstthreedigitsoftheusercode.Theentireusercode

is required to disable the outputs.