Operation Manual

Electric Connection

• The constant current terminal +12V (4) must be connected to a cable that also supplies 12V permanently when

the ignition is off (terminal 30 of the on-board network). This terminal serves to save the user settings, time, etc.

• The aerial control output (5) supplies a voltage of +12V when the device is switched on. This cable can be used

for the power supply of an electrical aerial, an amplifier aerial and for the voltage for switching on a performance

amplifier.

• The ignition terminal +12V (7) must be connected to a cable that is only live with +12V when the ignition is on

(terminal 15 of the on-board networks).



Do not connect this terminal to continuous current, otherwise the on-board battery could be discharged

when the vehicle is parked for a longer period of time.

• Connect the earth connection (8) with the vehicle body.



Adhesive techniques which become ever more common and painted metal parts impair the electric

conductivity. Therefore, not every metal part is a suitable earthing point.

Connecting the Aerial

• Connect the aerial plug of your vehicle with the aerial socket ANT at the back of the radio.

• If your vehicle has a different aerial plug, please use a suitable adapter, available in specialist shops.