User manual

Operating instructions
Gypsum Lamp “Lugo”, G9, 40 W
Item no. 1193532
Intended use
Thegypsumlampisintendedforindoorillumination.Onlyinstallanduseindry,closed
indoorrooms.Itisintendedforwallmounting.
Forsafetyandapprovalpurposes(CE),youmustnotrebuildand/ormodifythisproduct.
Ifyouusetheproductforpurposesotherthanthosedescribedabove,theproductmay
bedamaged.Inaddition,improperusecancausehazardssuchasshortcircuiting,
re, electric shock etc. Read the instructions carefully and keep them. Make this
productavailabletothirdpartiesonlytogetherwithitsoperatinginstructions.
This product complies with the statutory national and European requirements. All
companynamesandproductnamesaretrademarksoftheirrespectiveowners.All
rightsreserved.
Delivery content
• Gypsumlamp
• 2xscrew
• 2xtoothedlockwasher
• 2xdowels
• Operatinginstructions
Symbol explanation, markings
Thelightingashsymbolwithinatriangleisusedtoalertyouofpossible
healthrisks,e.g.causedbyelectricshock.
Thissymbolinformsyouaboutspecicriskswhenhandling,operatingor
usingtheproduct.
The“arrow”symbolindicatesspecialremarksandnotesforoperation.
0.2m
Thissymboldeterminestheminimumdistancetoilluminatedsurfaces.
Theproductisonlyintendedforapplicationanduseindryindoorrooms.It
maynotbecomemoistorwet.
Followtheoperatinginstructions!
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• Thedeviceisnotatoy.Keepitoutofthereachofchildrenandpets.
• Do not leave packaging material lying around carelessly. These may
becomedangerousplayingmaterialforchildren.
• Protecttheproduct from extremetemperatures,direct sunlight, strong
jolts,highhumidity,moisture,ammablegases,vapoursandsolvents.
• Donotplacetheproductunderanymechanicalstress.
• If it is no longer possible to operate the product safely, take it out of
operationandprotectitfromanyaccidentaluse.Safeoperationcanno
longerbeguaranteediftheproduct:
- isvisiblydamaged,
- isnolongerworkingproperly,
- hasbeenstoredforextendedperiodsinpoorambientconditionsor
- hasbeensubjectedtoanyserioustransport-relatedstresses.
• Pleasehandletheproductcarefully.Jolts,impactsorafallevenfroma
lowheightcandamagetheproduct.
• For installations in industrial facilities, follow the accident prevention
regulations for electrical systems and equipment of the government
safetyorganizationorthecorrespondingauthorityforyourcountry.
• Onlyinstalland use theproductindoors indryand closed rooms.The
productmustnotgetdamporwet,assuchconditionsconstitutearisk
ofelectricshock!
• Operate the product with mains voltage only (see chapter “Technical
data”).Neverattempttooperatetheproductwithothervoltage,asthis
mightdamagetheproduct.
• TheproductfeaturesaprotectionclassIdesign;theprotectiveground
wiremustbeconnected.
Ifthereisnopowercablewithprotectivegroundwireavailableatthe
installationsite,theproductmustnotbeconnected/usedthere. Inthis
case,installanewmainscablewithprotectivegroundconductor.
• Keepadistanceofatleast20cmbetweentheproductandilluminated
surfaces(especiallyhighlyammableobjectssuchascurtains).
• Nevercovertheproductwheninuse.
• Donottouchtheproductduringuse.First,turnotheproductandletit
cooldownsuciently.Failuretodosoposesariskofburning!
• Donotattachanyobjects(e.g.decorativematerial)totheproduct;there
isariskofre!
• Consultanexpertwhenindoubtaboutoperation,safetyorconnectionof
thedevice.
• Maintenance,modicationsandrepairsaretobeperformedexclusively
byanexpertorataqualiedshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Preparing installation
Installationoftheproductmustbecarriedoutbyaqualiedprofessional
(i.e.anelectrician)whoisfamiliarwithallapplicableregulations!
When handling mains voltage improperly, you will not only endanger
yourselfbutalsoothers!
Ifyoudonothavetherelevantexpertknowledge,donotinstalltheproduct
yourself,buthaveitdonebyanexpert.
• Mounttheproductonastable,verticalsurface.
• Nevermounttheproductinthevicinityofeasilyammablematerials(i.e.curtains,
fabrics,etc.).Makesurethereissucientroomforventilationaroundtheproduct.
• Whenmountingtheproduct,takeintoconsiderationtheroutingofthemainscable.
• Asuitableswitchisrequiredforturningtheproductonando.
• Theproductmustbecompletelyfreeofvoltageforinstallation.Justturningothe
lightviatheswitchdoesnotmakeitentirelyvoltage-free.
• Turn o the corresponding circuit breaker and/or automatic fuse to remove all
voltagefromthepowercircuit.Securethemagainstunauthorizedrestart,e.g.by
installinga warningsign. Alsoswitchotherelevantcircuitbreaker inorder to
disconnectallpolesofthemainscablefromthemainssupply.
• Checkthepowercircuitforanyremainingvoltageusinganappropriatemeasuring
device.