Instructions

Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Do not look directly into the light during operation. Looking directly into
the light may cause damage to the eyes. Especially in the case of persons
with epilepsy, looking into the light may cause an epileptic seizure.
Do not touch the hemisphere while the product is on.
Make sure the hemisphere can rotate freely. It may not come into contact
with other surfaces or objects.
Do not attach any objects (e.g. decorative material) to the product.
Never install the product near combustible materials (e.g. curtains,
decorations, etc.). Leave enough clearance around the product for
sufcient air circulation.
Do not operate the device unsupervised.
The mains outlet must be located near to the device and be easily
accessible.
Never pull the mains plug from the socket by pulling at the cable. Always
pull it from the mains socket using the intended grips.
Unplug the mains plug from the mains socket if you do not use the device
for an extended period of time.
For safety reasons, always unplug the device in case of a thunderstorm.
Make sure that the mains cable is not squeezed, bent, damaged by sharp
edges or put under mechanical stress. Avoid excessive thermal stress
on the mains cable from extreme heat or cold. Do not modify the mains
cable. Otherwise the mains cable may be damaged. A damaged mains
cable can cause a deadly electric shock.
Do not touch the mains cable if it is damaged. First, power down the
respective mains socket (e.g. via the respective circuit breaker) and
then carefully pull the mains plug from the mains socket. Never use the
product if the mains cable is damaged.
To prevent risks, damaged power cables may only be replaced by the
manufacturer, a professional workshop appointed by the manufacturer,
or a similarly qualied person.
Never plug in or unplug the mains plug when your hands are wet.
Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. Allow the device to reach room temperature before connecting
and using it. This may take several hours.
Never spill liquids over electrical devices and never place objects lled
with liquids near the device. If liquid or an object enters the interior of the
device nevertheless, rst power down the respective socket (e.g. switch
off circuit breaker) and then pull the mains plug from the mains socket.
Do not operate the product anymore afterwards, but take it to a specialist
workshop.
The use of electrical devices in schools, training facilities, hobby- and do-
it-yourself workshops must be supervised by trained personnel.
For installations in industrial facilities, follow the accident prevention
regulations for electrical systems and equipment of the government
safety organization or the corresponding authority for your country.
Consult an expert when in doubt about operation, safety or connection
of the device.
Maintenance, modications and repairs are to be performed exclusively
by an expert or at a qualied shop.
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating instructions
LED party lamp with mounting
Item no. 1517503
Intended use
The product is designed to produce decorative lighting effects. The product can be
set up on an even surface or mounted to a suitable wall. Power is supplied via a
normal household power outlet.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g.
in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
re, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
LED party lamp
3x dowels
3x screws
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/
downloads or scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with a ash in a triangle indicates health risks e.g. due to
electric shock.
The symbol with an exclamation mark in a triangle indicates important
instructions contained in these operating instructions that must be followed.
Use is only permitted in closed rooms.
Safety instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, ammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.