User manual

• Check the device and the power adapter from time to time for damage.
Do not touch the power pack, the watch winder, or the connection cable
if they show visible damage. First, switch off the power at the correspond-
ing mains socket (e.g. with the corresponding circuit breaker), and then
carefully unplug the power adapter from the mains socket. Do not use the
product afterwards, but take it to a specialist workshop.
• Never place vessels or containers containing liquids, such as glasses,
buckets, vases or plants, on the device or in the direct vicinity of the de-
vice. Liquids may seep into the casing and thus impair the electrical safety
of the device. Furthermore, there is a significant risk of fire or a lethal
electric shock! In such an event, isolate the mains socket to which the
product is connected (e.g. switch off the automatic fuse) and unplug the
power pack from the mains socket. Afterwards, the product can no longer
be used; take it to a specialist workshop.
• Do not expose the device to high temperatures, dripping or sprayed water,
strong vibrations or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or close to the
watch winder.
• If you have doubts about how the equipment should be operated or how to
connect it safely, consult a trained technician.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Do not operate the device when it is unattended.
• Do not use the device in a tropical climate.
• Also observe any further safety instructions in the individual sections of
this operating guide.
• If in doubt about how to connect the product correctly, or should any
questions arise that are not answered in these operating instructions,
please contact our technical service or another specialist.
Set-up
The device should be operated only on a stable, level surface.
Make sure you position the appliance in a safe and stable place, away from
objects that might might fall on it, thereby avoiding unwanted accidents.
Avoid heavy impacts, or moving the device, especially when it is in use.
• When selecting the set-up location, take the room layout into consideration (e.g.
location of the nearest socket, etc.).
• Also keep in mind, when selecting the set-up location, the need to avoid proximity to
direct sunlight, vibration, dust, hot and cold temperatures and dampness.
• Keep the product away from strong transformers or motors.
In view of the variety of paints and polishes used for furniture, the base of
the device may leave visible marks on the furniture on which it is placed, as
a result of a chemical reaction. Therefore, do not place the device on the
surface of valuable furniture without appropriate protection.
Connecting the power adapter
Only the enclosed power adapter may be used for the mains connection.
Connect the power adapter only to a normal mains socket connected to the
public supply.
Make sure that the current designation on the power adapter agrees with
the mains voltage of your power supply. Never try to operate the device
with any other voltage.
Make sure that the connecting cable is not pinched or damaged by sharp
edges when making the connection.
The mains socket to which the power adapter is connected must be easily
accessible, so the device can be quickly isolated from the mains power
supply in the event of a fault.
• Connect the low voltage adapter of the power adapter with the socket on the prod-
uct’s rear.
• Plug the power adapter into the wall socket.
G
Operating Instructions
Watch Winder, single-acting
Item no. 1052379
Intended use
The watch winder is for agitating mechanical automatic watches and thereby winding
them.
It must only be used with the power transformer included in delivery.
The power adapter is only suitable for use at a common household socket of the na-
tional grid.
Use of the watch winder and of the power adapter is only allowed in closed indoor
location, i.e. not outside. Contact with moisture, for example in bathrooms, must be
avoided.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
Read the operating instructions carefully and keep them for later reference.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Contents
• Watch winder
• Watch holder
• Power adapter
• Operating instruction
Explanation of the symbols
This symbol indicates specific risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
Safety Instructions
First, read the complete operating instructions carefully, as they contain
important information about the proper operation.
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any re-
sulting damage!
We shall not accept liability for damage to property or personal injury
caused by incorrect handling or non-compliance with the safety instruc-
tions! In such cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• The enclosed power adapter is constructed according to protection class
II.
• In order to disconnect the watch winder completely from the mains sup-
ply, the power adapter has to be disconnected from the mains socket.
• Never replace a damaged connecting cable on the power adapter. If the
connecting cable is damaged, the power adapter is unusable and must be
disposed of. Do not repair it.
• Devices that operate on the mains voltage must be kept out of the reach
of children. For this reason, be particularly careful when using the device
in the presence of children. They may try to stick objects into the device,
through openings in the housing. There is a life-threatening electric shock
hazard.