User manual

31
12. Troubleshooting
By purchasing this device, you have acquired a product designed to the state of the art and operationally reliable.
Nevertheless, problems or errors may occur. Therefore, we would like to describe how to eliminate possible errors
here:
Always observe the safety information!
There suddenly is no fog in operation anymore
• The device performs subsequent heating. Once the heating process is complete, the device will emit fog again.
• The device no longer is connected to the voltage supply. Check for correct connection and voltage supply to the
mains socket.
• The tank is empty. Let the device cool off and top up the tank again.
The display shows MACHINE TEMPERATURE IS TOO HIGH
• The tank is empty. Let the device cool off and top up the tank again.
• Internal error, please have the device repaired.
The display shows TEMPERATURE SENSOR ERROR
• Internal error, please have the device repaired.
The device produces fog for a short time after deactivation/disconnection
• It is not a defect. The remaining fog liquid in the still-hot fog exit opening evaporates.
Repairs other than those described above must only be carried out by an authorised specialist.