User manual

27
• When the device is on, the POWER (8) switch lights up. The display (10) comes on and shows the software version.
• HEATING appears with a percentage of 0-100%. The device heats up now.
• Heating up takes a few minutes.
• When the device has reached its operating temperature, MACHINE READY will appear in the display (10).
• The device can be operated as a hazer (production of a haze effect) or as a fog machine (production of dense fog).
• For hazer operation, the switch HAZE/FOG (12) must not be pushed; for operation as a fog machine, it must be
pushed.
b) Operation as a hazer
Operation at the Device
Timer Operation
• Push the FUNCTION (11) button to make several pre-settings for timer operation:
- Push 1x to set the pause time of the working interval with the
(13) and (14) buttons.
- Push 2x to set the emission time of the working interval with the
(13) and (14) buttons.
- Push 3x to set the haze volume with the
(13) and (14) buttons.
- Push 4x to set the fan speed with the
(13) and (14) buttons.
- Push 5x to set the DMX starting address for DMX operation as described below with the
(13) and (14)
buttons.
• The TIMER (16) button starts timer operation with the above settings.
• The settings can be adjusted by pushing the FUNCTION (11) button and changing the values with the
(13)
and (14) buttons as well during timer operation.
• To interrupt timer operation, push the
(15) button.
Manual Operation
• Push the VOLUME PUMP/FAN (17) button to operate the device manually (without a timer).
• The device starts in manual operation.
• Push the FUNCTION (11) button to change the parameters HAZE (haze volume) and FAN (fan speed). The chosen
parameter is marked with a star in the display (10).
• Adjust the selected parameter with the
(13) and (14) buttons.
• To interrupt manual operation, push the
(15) button.