User manual

10.16 Setting call confirmation
This menu item allows you to set whether it is sufficient that one of the people called confirms the alarm
message or whether all the people whose telephone numbers you have entered need to do so.
Example 1:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 0 (factory setting).
In an alarm situation the sequence without confirmation is as follows:
Telephone number Text message
1st number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
2nd number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
3rd number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
1st number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
2nd number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
3rd number 1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
121