Information

32
15
Auto home
Level Bed
Preheat PLA
Load filament
16
• Bring back the 3D printer into its normal position.
• Insert the lament into the lament opening in the
extruder.
• Select < Load lament > under the < Prepare > menu.
17
18
• Gently push and guide the lament into extruder until
it exits from the nozzle.
• Feel the lament slowly getting drawn into the
extruder.
• Switch the 3D printer off.
• Let the 3D printer cool down to room temperature.
If no lament exits from the nozzle after lament movement stopped, select < Load lament > again. After
lament is loaded, lament residue can be removed with the tweezers.