Information

M3 x 10

• Place the feeder with the ball bearing laterally on the

motor unit. The opening for the lament in the feeder

must point upwards.

• Insert and tighten the screws to fasten the feeding

module.

M3 x 14,5

M3 x 20

• Place the heatsink onto the motorunit, so that the

holes and threaded holes are aligned.. Align extruder

with tapped holes in the extruder carriage.

• Insert and tighten the screws.

• Place the fan onto the heatsink, so that the holes are

aligned. Make sure the cables on the fan point toward

the nozzle.

• Insert the screws and tighten them only slightly.